[en]
EDIT_MODE_ON = [NavSys] Edit mode on!
NODE_NOT_FOUND = [NavSys] No navigation information found to save!
NAV_SAVE_ERROR = [NavSys] File creation failed. Unable to save navigation information!
NAV_SAVED = [NavSys] %d navigation nodes are saved!
NAV_FILE_NOT_FOUND = [NavSys] The file for navigation information is not found!
NAV_LOAD_ERROR = [NavSys] Failed to read navigation file!
NAV_LOAD_ERROR2 = [NavSys] The navigation file is corrupted!
NAV_LOADED = [NavSys] Navigation information loaded. There are %d nodes in total!
NAV_WARNING = [NavSys] Navigation file exception. The remaining %d bytes are not read!
NAV_DELETED = [NavSys] Navigation nodes and file have been deleted!
MENU_NAME_MAIN = Navigation System
ITEM_NAME_NODE_CREATE = Node creation
ITEM_NAME_NODE_EDIT = Node editing
ITEM_NAME_TEST = Test function
ITEM_NAME_SAVE = Save navigation file
ITEM_NAME_RELOAD = Reload navigation file
ITEM_NAME_DELETE = Delete navigation file
ITEM_NAME_EDIT_OFF = Edit mode off
ITEM_NAME_MENU_OFF = Close menu
MENU_NAME_NODE_CREATE = Node Creation
ITEM_NAME_AUTO_GENERATION = Automatic generation
ITEM_NAME_CREATE_TO_FOOT = Create to foot
ITEM_NAME_CREATE_TO_AIM = Create to aiming
ITEM_NAME_AUTO_ALIGN = Auto align
ITEM_NAME_TO_MAIN = Main Menu
MENU_NAME_NODE_EDIT = Node Editing
ITEM_NAME_NODE_SELECT = Node: Select / Unselect
ITEM_NAME_NODE_CROUCH = Node: Duck / Stand
ITEM_NAME_NODE_MERGE = Node: Merge
ITEM_NAME_NODE_DELETE = Node: Delete
ITEM_NAME_NODE_AUTO_MERGE1 = Auto Merge (Short)
ITEM_NAME_NODE_AUTO_MERGE2 = Auto Merge (Unlimited)
ITEM_NAME_PATH_CONNECT = Path: Connect / Not
ITEM_NAME_PATH_SET_CROUCH = Path: Crouchrun / Not
ITEM_NAME_PATH_SET_CLIMB = Path: Climb / Not
ITEM_NAME_PATH_SET_HEIGHT = Path: Set height
ITEM_NAME_BACK = Back
ITEM_NAME_NEXT = Next
MENU_NAME_TEST = Test Function
ITEM_NAME_TEST1 = NavSys_Pathfinding
ITEM_NAME_TEST2 = NavSys_GetWaypointFinal
ITEM_NAME_TEST3 = NavSys_GetWaypointSecond
ITEM_NAME_TEST4 = NavSys_GetWaypointPathInfo
ITEM_NAME_TEST5 = NavSys_GetSpawnPos
ITEM_NAME_TEST6 = NavSys_GetLadder
ITEM_NAME_TEST7 = NavBox_Exist&Contain&Nearest
ITEM_NAME_TEST8 = NavBox_GetNodeArray
ITEM_NAME_TEST9 = NavBox_GetNode
ITEM_NAME_TEST10 = NavBox_GetNodeNearest
ITEM_NAME_TEST11 = NavBox_GetNodeContain
ITEM_NAME_TEST12 = NavBox_GetNodeIntersect
ITEM_NAME_TEST13 = NavNode_DrawBox
ITEM_NAME_TEST14 = NavNode_GetNearest
ITEM_NAME_TEST15 = NavNode_GetPathCoord
ITEM_NAME_TEST16 = NavNode_GetPathCoord2
ITEM_NAME_TEST17 = NavNode_PathExist
ITEM_NAME_TEST18 = NavNode_PathExist2
EDIT_MODE_OFF = [NavSys] Edit mode off!
AUTO_ALIGN_ON = [NavSys] Auto align on!
AUTO_ALIGN_OFF = [NavSys] Auto align off!
FAILED_TO_CREATE_NODE = [NavSys] Failed to create node!
CREATE_NODE = [NavSys] The node (%d) has been created. There are %d nodes on the map!
FAILED_TO_SELECT_NODE = [NavSys] Failed to select. You must aim at the nodes!
SELECT_NODE = [NavSys] Node (%d) is selected!
UNSELECT_NODE = [NavSys] Node (%d) is unselected!
FAILED_TO_SET_NODE_CROUCH = [NavSys] Failed to set duck/stand. You must select the node first!
SET_NODE_DUCKING = [NavSys] Node (%d) has been ducking.
SET_NODE_STANDING = [NavSys] Node (%d) has been standing.
FAILED_TO_MERGE1 = [NavSys] Failed to merge. You must select 2 nodes!
FAILED_TO_MERGE2 = [NavSys] Failed to merge. Nodes in standing and ducking states cannot be merged!
FAILED_TO_MERGE3 = [NavSys] Failed to merge. Node (%d) cannot reach node (%d)!
FAILED_TO_MERGE4 = [NavSys] Failed to merge. The normal vector from node (%d)&(%d) is different!
FAILED_TO_MERGE5 = [NavSys] Failed to merge. The edges of node (%d)&(%d) cannot be aligned!
FAILED_TO_MERGE6 = [NavSys] Failed to merge. Node (%d)/(%d) is the end of a one-way path and is under the cliff!
FAILED_TO_MERGE7 = [NavSys] Failed to merge. Node (%d)/(%d) is the end of a one-way path and is above the cliff!
FAILED_TO_MERGE8 = [NavSys] Failed to merge. The common end of node (%d)&(%d) cannot be reached in the same action!
FAILED_TO_MERGE9 = [NavSys] Failed to merge. The obstacle heights of the common end of node (%d)&(%d) are different!
FAILED_TO_MERGE10 = [NavSys] Failed to merge. Node (%d)&(%d) cannot go back and forth in the same action!
FAILED_TO_MERGE11 = [NavSys] Failed to merge. There are obstacles between node (%d)&(%d)!
MERGE = [NavSys] Node (%d)&(%d) have been merged.
NODE_DELETION_FAILED = [NavSys] Node deletion failed. You must select a node!
NODE_DELETED = [NavSys] Node (%d) have been deleted!
AUTO_MERGE_FAILED = [NavSys] Auto merge failed. Node not found!
PATH_CONNECT_FAILED = [NavSys] Path connect/disconnect failed. You must select 2 nodes!
PATH_DISCONNECT = [NavSys] The path from node (%d) to node (%d) is disconnect.
PATH_CONNECT = [NavSys] Node (%d) is connected to node (%d).
PATH_CHANGE_FLAG_FAILED1 = [NavSys] Failed to change crouchrun flag. You must select 2 nodes!
PATH_CHANGE_FLAG_FAILED2 = [NavSys] Node (%d) is not the end of node (%d). Cannot change crouchrun flag!
PATH_ADD_FLAG1 = [NavSys] Add the crouchrun flag for the path from node (%d) to node (%d).
PATH_SUB_FLAG1 = [NavSys] Remove the crouchrun flag for the path from node (%d) to node (%d).
PATH_CHANGE_FLAG_FAILED3 = [NavSys] Failed to change climb flag. You must select 2 nodes!
PATH_CHANGE_FLAG_FAILED4 = [NavSys] Node (%d) is not the end of node (%d). Cannot change climb flag!
PATH_ADD_FLAG2 = [NavSys] Add the climb flag for the path from node (%d) to node (%d).
PATH_SUB_FLAG2 = [NavSys] Remove the climb flag for the path from node (%d) to node (%d).
PATH_CHANGE_HEIGHT_FAILED1 = [NavSys] Failed to change height. You must select 2 nodes!
PATH_CHANGE_HEIGHT_FAILED2 = [NavSys] Failed to change height. Node (%d) is not the end of node (%d)!
PATH_CHANGE_HEIGHT = [NavSys] The height difference from node (%d) to node (%d) is %.0f. Change to %.0f.
NODE_NOT_FOUND = [NavSys] There are no nodes in the current map.
TEST1_NAME = [NavSys] NavSys_Pathfinding...
TEST1_FAILED1 = [NavSys] Failed. You must select 2 nodes!
TEST1_FAILED2 = [NavSys] Failed. %d accesses. %d ticks.
TEST1 = [NavSys] Node (%d) to node (%d). %d waypoints. %d accesses. %d ticks.
TEST2_NAME = [NavSys] NavSys_GetWaypointFinal...
TEST2_FAILED = [NavSys] Failed. You must select 2 nodes!
TEST2 = [NavSys] The node index of the final waypoint is (%d) when the limit is 0 tick.
TEST3_NAME = [NavSys] NavSys_GetWaypointSecond...
TEST3_FAILED = [NavSys] Failed. You must select 2 nodes!
TEST3 = [NavSys] The node index of the second waypoint is (%d) when the limit is 0 tick.
TEST4_NAME = [NavSys] NavSys_GetWaypointPathInfo...
TEST4_FAILED = [NavSys] Failed. You must select 2 nodes!
TEST4 = [NavSys] You need to go to node (%d) and pass path (%d) and arrive at node (%d).
TEST5_NAME = [NavSys] NavSys_GetSpawnPos...
TEST5 = [NavSys] %d spawn points are recorded on the current map!
TEST6_NAME = [NavSys] NavSys_GetLadder...
TEST6 = [NavSys] %d ladder are recorded on the current map!
TEST7_NAME = [NavSys] NavBox_Exist&Contain&Nearest...
TEST7_DRAW_CONTAIN = [NavSys] You are contained in a box. The box has been drawn!
TEST7_DRAW_NEAREST = [NavSys] You are not contained in the box. The nearest box has been drawn!
TEST8_NAME = [NavSys] NavBox_GetNodeArray...
TEST8_DRAW_CONTAIN = [NavSys] The box containing to you intersects with %d nodes!
TEST8_DRAW_NEAREST = [NavSys] The box nearest to you intersects with %d nodes!
TEST9_NAME = [NavSys] NavBox_GetNode...
TEST9 = [NavSys] Find your nearest starting node (%d). %d ticks!
TEST10_NAME = [NavSys] NavBox_GetNodeNearest...
TEST10 = [NavSys] Find your nearest node (%d). %d ticks!
TEST11_NAME = [NavSys] NavBox_GetNodeContain...
TEST11_FAILED = [NavSys] Failed. You are not contained in the node.
TEST11 = [NavSys] You are contained in node (%d). %d ticks!
TEST12_NAME = [NavSys] NavBox_GetNodeIntersect...
TEST12_FAILED = [NavSys] Failed. You are not intersected by any node.
TEST12 = [NavSys] You intersect with node (%d). %d ticks!
TEST13_NAME = [NavSys] NavNode_DrawBox...
TEST13_FAILED = [NavSys] Failed. Please select at least 1 node.
TEST13 = [NavSys] The %d nodes you selected have been drawn!
TEST14_NAME = [NavSys] NavNode_GetNearest...
TEST14 = [NavSys] Find your nearest node (%d). %d ticks!
TEST15_NAME = [NavSys] NavNode_GetPathCoord...
TEST15_FAILED1 = [NavSys] Failed. You must select 2 node!
TEST15_FAILED2 = [NavSys] Failed. There is no path between node (%d) and node (%d).
TEST15 = [NavSys] The path between node (%d) and node (%d) has been drawn!
TEST16_NAME = [NavSys] NavNode_GetPathCoord2...
TEST16_FAILED1 = [NavSys] Failed. You must select 2 node!
TEST16_FAILED2 = [NavSys] Failed. There is no path between node (%d) and node (%d).
TEST16_WALK = [NavSys] Move with walk flag. Obstacle height: %.0f.
TEST16_CROUCHRUN = [NavSys] Move with crouchrun flag. Obstacle height: %.0f.
TEST16_CLIMB = [NavSys] Move with climb flag. Obstacle height: %.0f.
TEST16_CROUCHCLIMB = [NavSys] Move with crouchrun and climb flags. Obstacle height: %.0f.
TEST16 = [NavSys] The path between node (%d) and node (%d) has been drawn!
TEST17_NAME = [NavSys] NavPath_Exist...
TEST17_FAILED = [NavSys] Failed. Unable to move forward.
TEST17_END_STATE1 = [NavSys] You can stand upright at the end point.
TEST17_END_STATE2 = [NavSys] You can't stand upright at the end point.
TEST17_CROUCHRUN1 = [NavSys] You don't need to squat to reach the end point.
TEST17_CROUCHRUN2 = [NavSys] You have to squat to reach the end point.
TEST17_HEIGHT = [NavSys] Obstacle height: %.0f.
TEST18_NAME = [NavSys] NavPath_Exist2...
TEST18_FAILED = [NavSys] Failed. Unable to move forward.
TEST18_END_STATE1 = [NavSys] You can stand upright at the end point.
TEST18_END_STATE2 = [NavSys] You can't stand upright at the end point.
TEST18_CROUCHRUN1 = [NavSys] You don't need to squat to reach the end point.
TEST18_CROUCHRUN2 = [NavSys] You have to squat to reach the end point.
TEST18_HEIGHT = [NavSys] Obstacle height: %.0f.
[cn]
EDIT_MODE_ON = [提示]你开启了导航系统的编辑模式!
NODE_NOT_FOUND = [提示]没有导航信息,无法保存.
NAV_SAVE_ERROR = [提示]文件创建失败.无法保存导航信息.
NAV_SAVED = [提示]成功保存导航信息.共%d个导航点.
NAV_FILE_NOT_FOUND = [提示]未找到存有导航信息的文件.
NAV_LOAD_ERROR = [提示]未找到或无法读取存有导航信息的文件.
NAV_LOAD_ERROR2 = [提示]无法读取导航信息.导航文件已损坏.
NAV_LOADED = [提示]成功载入导航信息.共%d个导航点.
NAV_WARNING = [提示]导航文件异常.剩余%d字节未能读取.
NAV_DELETED = [提示]已删除所有导航点,并删除导航文件.
MENU_NAME_MAIN = 导航系统
ITEM_NAME_NODE_CREATE = 创建导航点
ITEM_NAME_NODE_EDIT = 编辑导航点
ITEM_NAME_TEST = 测试功能
ITEM_NAME_SAVE = 保存导航文件
ITEM_NAME_RELOAD = 重载导航文件
ITEM_NAME_DELETE = 删除导航文件
ITEM_NAME_EDIT_OFF = 退出编辑模式
ITEM_NAME_MENU_OFF = 关闭菜单
MENU_NAME_NODE_CREATE = 创建导航点
ITEM_NAME_AUTO_GENERATION = 自动创建
ITEM_NAME_CREATE_TO_FOOT = 创建到脚下
ITEM_NAME_CREATE_TO_AIM = 创建到准心
ITEM_NAME_AUTO_ALIGN = 自动对齐
ITEM_NAME_TO_MAIN = 主菜单
MENU_NAME_NODE_EDIT = 编辑导航点
ITEM_NAME_NODE_SELECT = 导航点:选择/舍弃
ITEM_NAME_NODE_CROUCH = 导航点:蹲下/站起
ITEM_NAME_NODE_MERGE = 导航点:合并
ITEM_NAME_NODE_DELETE = 导航点:删除
ITEM_NAME_NODE_AUTO_MERGE1 = 导航点:自动合并.短
ITEM_NAME_NODE_AUTO_MERGE2 = 导航点:自动合并.长
ITEM_NAME_PATH_CONNECT = 路径:创建/删除
ITEM_NAME_PATH_SET_CROUCH = 路径:蹲跑标志
ITEM_NAME_PATH_SET_CLIMB = 路径:攀爬标志
ITEM_NAME_PATH_SET_HEIGHT = 路径:障碍高度
ITEM_NAME_BACK = 上一页
ITEM_NAME_NEXT = 下一页
MENU_NAME_TEST = 测试功能
ITEM_NAME_TEST1 = NavSys_Pathfinding
ITEM_NAME_TEST2 = NavSys_GetWaypointFinal
ITEM_NAME_TEST3 = NavSys_GetWaypointSecond
ITEM_NAME_TEST4 = NavSys_GetWaypointPathInfo
ITEM_NAME_TEST5 = NavSys_GetSpawnPos
ITEM_NAME_TEST6 = NavSys_GetLadder
ITEM_NAME_TEST7 = NavBox_Exist&Contain&Nearest
ITEM_NAME_TEST8 = NavBox_GetNodeArray
ITEM_NAME_TEST9 = NavBox_GetNode
ITEM_NAME_TEST10 = NavBox_GetNodeNearest
ITEM_NAME_TEST11 = NavBox_GetNodeContain
ITEM_NAME_TEST12 = NavBox_GetNodeIntersect
ITEM_NAME_TEST13 = NavNode_DrawBox
ITEM_NAME_TEST14 = NavNode_GetNearest
ITEM_NAME_TEST15 = NavNode_GetPathCoord
ITEM_NAME_TEST16 = NavNode_GetPathCoord2
ITEM_NAME_TEST17 = NavNode_PathExist
ITEM_NAME_TEST18 = NavNode_PathExist2
EDIT_MODE_OFF = [提示]你关闭了导航系统的编辑模式!
AUTO_ALIGN_ON = [提示]已开启自动对齐功能.
AUTO_ALIGN_OFF = [提示]已关闭自动对齐功能.
FAILED_TO_CREATE_NODE = [提示]创建导航点失败.
CREATE_NODE = [提示]成功创建导航点(%d).地图上已有%d个导航点!
FAILED_TO_SELECT_NODE = [提示]选取失败.你需要瞄准导航点!
SELECT_NODE = [提示]选取导航点(%d)!
UNSELECT_NODE = [提示]舍弃导航点(%d)!
FAILED_TO_SET_NODE_CROUCH = [提示]导航点蹲下/站起失败.你需要先选中导航点!
SET_NODE_DUCKING = [提示]导航点(%d)已被设为蹲下状态.
SET_NODE_STANDING = [提示]导航点(%d)已被设为直立状态.
FAILED_TO_MERGE1 = [提示]合并失败.你需要选中2个导航点!
FAILED_TO_MERGE2 = [提示]合并失败.直立与蹲下状态的导航点无法合并!
FAILED_TO_MERGE3 = [提示]合并失败.(%d)导航点无法抵达(%d)导航点!
FAILED_TO_MERGE4 = [提示]合并失败.导航点(%d)和(%d)地面面向不同!
FAILED_TO_MERGE5 = [提示]合并失败.导航点(%d)和(%d)无法对齐!
FAILED_TO_MERGE6 = [提示]合并失败.(%d)或(%d)属于某个单向路径的终点并且位于悬崖底部!
FAILED_TO_MERGE7 = [提示]合并失败.(%d)或(%d)属于某个单向路径的终点并且位于悬崖顶部!
FAILED_TO_MERGE8 = [提示]合并失败.(%d)和(%d)无法以相同姿态抵达某个共有终点.
FAILED_TO_MERGE9 = [提示]合并失败.(%d)和(%d)抵达某个共有终点的障碍高度不同.
FAILED_TO_MERGE10 = [提示]合并失败.(%d)和(%d)无法以相同姿态互相往返.
FAILED_TO_MERGE11 = [提示]合并失败.(%d)和(%d)往返的障碍高度不同.
MERGE = [提示](%d)导航点合并到(%d)导航点.
NODE_DELETION_FAILED = [提示]删除失败.你需要选中导航点才能删除!
NODE_DELETED = [提示]删除导航点(%d)!
AUTO_MERGE_FAILED = [提示]地图上没有导航点.不能进行合并.
PATH_CONNECT_FAILED = [提示]你需要选中2个导航点,才能创建或删除路径!
PATH_DISCONNECT = [提示]删除了(%d)至(%d)导航点的路径.
PATH_CONNECT = [提示]创建了(%d)至(%d)导航点的路径.
PATH_CHANGE_FLAG_FAILED1 = [提示]你需要选择2个导航点,才能更改蹲跑标志!
PATH_CHANGE_FLAG_FAILED2 = [提示](%d)不是(%d)的终点.无法更改蹲跑标志!
PATH_ADD_FLAG1 = [提示]为(%d)至(%d)导航点的路径添加蹲跑标志.
PATH_SUB_FLAG1 = [提示]为(%d)至(%d)导航点的路径删除蹲跑标志.
PATH_CHANGE_FLAG_FAILED3 = [提示]你需要选择2个导航点,才能更改攀爬标志!
PATH_CHANGE_FLAG_FAILED4 = [提示](%d)不是(%d)的终点.无法更改攀爬标志!
PATH_ADD_FLAG2 = [提示]为(%d)至(%d)导航点的路径添加攀爬标志.
PATH_SUB_FLAG2 = [提示]为(%d)至(%d)导航点的路径删除攀爬标志.
PATH_CHANGE_HEIGHT_FAILED1 = [提示]你需要选中2个导航点,才能设置障碍高度!
PATH_CHANGE_HEIGHT_FAILED2 = [提示](%d)不是(%d)的终点,不能设置障碍高度!
PATH_CHANGE_HEIGHT = [提示](%d)至(%d)导航点的障碍高度%.0f被改为%.0f.
NODE_NOT_FOUND = [提示]当前地图没有节点.
TEST1_NAME = [提示]NavSys_Pathfinding...
TEST1_FAILED1 = [提示]失败.你必须选中2个导航点!
TEST1_FAILED2 = [提示]失败.访问%d个导航点.消耗%d毫秒.
TEST1 = [提示]导航点(%d)至(%d)生成路径.共%d个路径点.访问%d个导航点.消耗%d毫秒.
TEST2_NAME = [提示]NavSys_GetWaypointFinal...
TEST2_FAILED = [提示]失败.你必须选中2个导航点!
TEST2 = [提示]限时0毫秒的情况下,最终路径点的导航点索引为(%d).
TEST3_NAME = [提示]NavSys_GetWaypointSecond...
TEST3_FAILED = [提示]失败.你必须选中2个导航点!
TEST3 = [提示]限时0毫秒的情况下,第二路径点的导航点索引为(%d).
TEST4_NAME = [提示]NavSys_GetWaypointPathInfo...
TEST4_FAILED = [提示]失败.你必须选中2个导航点!
TEST4 = [提示]你需要通过导航点(%d)的路径(%d),抵达导航点(%d).
TEST5_NAME = [提示]NavSys_GetSpawnPos...
TEST5 = [提示]当前地图已经被记录了%d个出生点!
TEST6_NAME = [提示]NavSys_GetLadder...
TEST6 = [提示]当前地图已经被记录了%d个梯子!
TEST7_NAME = [提示]NavBox_Exist&Contain&Nearest...
TEST7_DRAW_CONTAIN = [提示]你被一个盒子所包含.已画出这个盒子!
TEST7_DRAW_NEAREST = [提示]你未被任何盒子包含.已画出与你最近的盒子!
TEST8_NAME = [提示]NavBox_GetNodeArray...
TEST8_DRAW_CONTAIN = [提示]包含你的盒子同时与%d个导航点相交!
TEST8_DRAW_NEAREST = [提示]与你最近的盒子同时与%d个导航点相交!
TEST9_NAME = [提示]NavBox_GetNode...
TEST9 = [提示]寻找与你最近的起始导航点.消耗%d毫秒!
TEST10_NAME = [提示]NavBox_GetNodeNearest...
TEST10 = [提示]寻找与你最近的导航点.消耗%d毫秒!
TEST11_NAME = [提示]NavBox_GetNodeContain...
TEST11_FAILED = [提示]失败.你未被任何导航点包含.
TEST11 = [提示]寻找包含你的导航点(%d),消耗%d毫秒!
TEST12_NAME = [提示]NavBox_GetNodeIntersect...
TEST12_FAILED = [提示]失败.你未与任何导航点相交.
TEST12 = [提示]寻找与你相交的导航点(%d),消耗%d毫秒!
TEST13_NAME = [提示]NavNode_DrawBox...
TEST13_FAILED = [提示]失败.请选中至少1个导航点.
TEST13 = [提示]已画出你选中的%d个导航点!
TEST14_NAME = [提示]NavNode_GetNearest...
TEST14 = [提示]寻找与你最近的导航点.消耗%d毫秒!
TEST15_NAME = [提示]NavNode_GetPathCoord...
TEST15_FAILED1 = [提示]失败.你必须选中2个导航点!
TEST15_FAILED2 = [提示]失败.导航点(%d)与(%d)之间没有路径!
TEST15 = [提示]已画出导航点(%d)与(%d)之间的路径!
TEST16_NAME = [提示]NavNode_GetPathCoord2...
TEST16_FAILED1 = [提示]失败.你必须选中2个导航点!
TEST16_FAILED2 = [提示]失败.导航点(%d)与(%d)之间没有路径!
TEST16_WALK = [提示]路径标志:步行.障碍物高度:%.0f.
TEST16_CROUCHRUN = [提示]路径标志:蹲跑.障碍物高度:%.0f.
TEST16_CLIMB = [提示]路径标志:攀爬.障碍物高度:%.0f.
TEST16_CROUCHCLIMB = [提示]路径标志:蹲跑+攀爬.障碍物高度:%.0f.
TEST16 = [提示]已画出导航点(%d)与(%d)之间的路径!
TEST17_NAME = [提示]NavPath_Exist...
TEST17_FAILED = [提示]失败.无法前进.
TEST17_END_STATE1 = [提示]你能直立于终点位置.
TEST17_END_STATE2 = [提示]你无法在终点位置直立.
TEST17_CROUCHRUN1 = [提示]抵达终点不需要蹲.
TEST17_CROUCHRUN2 = [提示]你需要蹲下才能抵达终点.
TEST17_HEIGHT = [提示]障碍物高度:%.0f.
TEST18_NAME = [提示]NavPath_Exist2...
TEST18_FAILED = [提示]失败.无法前进.
TEST18_END_STATE1 = [提示]你能直立于终点位置.
TEST18_END_STATE2 = [提示]你无法在终点位置直立.
TEST18_CROUCHRUN1 = [提示]抵达终点不需要蹲.
TEST18_CROUCHRUN2 = [提示]你需要蹲下才能抵达终点.
TEST18_HEIGHT = [提示]障碍物高度:%.0f.